How To Setup Wavlink Aerial HD4 Outdoor Extender
Wavlink Aerial HD4 Outdoor Extender Consists of four external antennas with 2.4G and 5G two frequency bands, making it possible to cover dead zones.
Here we will help you in the Wavlink Aerial HD4 Outdoor Extender Setup process. There are some necessary things that must be there to complete the Netgear extender setup. Here are those;
The wifi Extender must be near the router within the same room in which the router is placed. After completion of setup, you can change its location.
There must be a good power supply.
We must use the latest web browser for the Wavlink Aerial HD4 Outdoor Extender Setup in the manual method.
After checking all these things we can start our Wavlink Aerial HD4 Outdoor Extender Setup . You can set up your wifi extender by Manual Method (using an updated Web Browser) and Using the WPS button. Let’s discuss both of them.
Manual Method
Manual method is also known as web browser setup. In this, we use a web browser to set up our Wavlink Aerial HD4 Outdoor Extender Setup. We must follow the mentioned steps to get it done.
1. Plug the Wavlink Aerial HD4 Outdoor Extender Setup into the power supply.
2. Connect the POE box’s ethernet cable to the Aerial HD4 extender.
3. Then, using the same connector box, connect the other ethernet cable to your main router or modem.
4. First of all we will connect our wireless-enabled device with a Wavlink Aerial HD4 Outdoor Extender for the setup.
5. Visit: wifi.wavlink.com When you have arrived at the Wavlink outdoor extender configuration page, you have to log in with the default username and password and follow the steps.
5. The Wavlink outdoor extender has now been successfully configured in router mode.
WPS Method
For this method, we have to ensure that our router must have a WPS button so that we can complete our Wavlink Aerial HD4 Outdoor Extender Setup setup process.
2. We will press the WPS button on the Wifi extender for 5-9 sec.
3. After that we will press the WPS button on our router for the same time interval.
4. When LED lights turn solid blue, your Wavlink Aerial HD4 Outdoor Extender Setup is ready to use.
Onces the setup is done, you can move it around your home as needed.
How to Update Wavlink Aerial HD4 Outdoor Extender firmware
Firmware updates will help you to increase your Wavlink Aerial HD4 Outdoor extender performance and efficiency. These updates also enhance the security of wifi the extender.”
1. First, log in to your Wavlink Aerial HD4 Outdoor Extender using https://wifi.wavlink.com with your SSID(Username) and Password.
2. Click on the Menu icon on the webpage, in this you will find the firmware update option.
3. On the firmware update webpage, you will get the option to check for updates.
4. If there will be any update, please follow the steps that the webpage will describe to you and your firmware will get updated.
How to Reset the Wavlink Aerial HD4 Outdoor Wifi Extender
Unfortunately, if you forget your password or username for the Wavlink Aerial HD4 Outdoor Extender. You can simply reset your wifi extender.
1.You will find the extender’s reset or factory reset button on the side or bottom panel behind a small hole.
2.Use a toothpick or similarly sized object to press and hold the Reset or Factory Reset button for 8-10 seconds.
After this, your Wavlink Aerial HD4 Outdoor Extender is ready for a new setup